#!/bin/bash
################################################################################
# Script name: free_space_dated_dirs_v1.4beta2.sh #
# Author: SoD- #
# Contact: SoD- @ EFNet #
# Releasedate: 2002-08-29 #
# #
# This script have been confirmed to work in Slackware 8.0 and FreeBSD 4.5. #
# This script is meant to be run from crontab at an approperiate interval and #
# will then delete dirs in a DATED DIR STRUCTRE until a specified amount of #
# space is free. The script can be run with arguments or with the settings in #
# this file. Running it with arguments can be handy if u have many sections #
# since it then only requires 1 copy of this script. #
# If all/some of your sections doesn't use dated dirs you should use another #
# script, for example my free_space_v1.2.2.sh for them. #
# This script is meant for mp3/0-day and other sections that uses dated dirs. #
# You can specify how much space the section is allowed to contain, letting #
# you have multiple sections on one device. You can set groups whos releases #
# you don't want deleted by the script (eg,don't delete any of CORE's or SND's #
# releases). The "VIP group releases" will be moved to a different location #
# and if a dir with the same name already exists there, the one to be moved #
# will be renamed (adds the current date in seconds to the end). #
# Nuked dirs from "VIP groups" will get deleted, not moved. #
# It deletes the dated dirs by their name (hence the dated dirs only) and all #
# the dirs/files inside them by their modification date. It only deletes dated #
# dirs (ie. 0311) so dirs named otherwise than a dated dir won't be touched. #
# It will delete a dir named '0000' and a few more non-dated-dirs that consist #
# of four digits. #
# Since some filesystems (and mounts) don't write the status of the files on #
# the hard discs right away, there's an option that makes the script wait for #
# a specified time until it continues to delete. #
# To easy the configuration there's a variable called DEBUG, which when set to #
# 1 runs the script without deleting anything. It will say which dir is about #
# to get deleted but not deleting it. Since it isn't deleted, the script will #
# run forever so just hit ctrl-c to stop it. It writes to glftpd.log so that a #
# botscript can announce it (see below on how to configure the botscript). #
# The script does something like this: #
# * Deleting any files directly inside the oldest dated dir. #
# * Deleting any nuked dirs inside the oldest dated dir. #
# * Deleting oldest dir inside oldest dated dir. #
# * Moving any "VIP groups" releases to a specified dir. #
# * Deleting the oldest dated dir if it's empty. #
# * Repeats above in the "next" dated dir until enough space is free. #
# #
# Installation: -Put this file in some approperiate place, for example #
# /glftpd/bin/free_space_dated_dirs_v1.4beta2.sh #
# -Make it executable #
# (chmod 755 /glftpd/bin/free_space_dated_dirs_v1.4beta2.sh) #
# -Edit your crontab (crontab -e) and write something like: #
# 0,20,40 * * * * /glftpd/bin/free_space_dated_dirs_v1.4beta2.sh#
# -Edit this script to suit your setup. Note that all you need #
# to configure if you want to call the script with arguments is #
# the location of the config-/logfiles. #
# -Execute the script manually to spot any obvious errors. #
# -If the execution went fine, set DEBUG to 0 (DEBUG=0). #
# -Add it to your crontab (crontab -e) by writing something like:#
# 0,20,40 * * * * /glftpd/bin/free_space_dated_dirs_v1.4beta2.sh#
# or if you want to call it with arguments: #
# 0,20,40 * * * * /glftpd/bin/free_space_dated_dirs_v1.4beta2.sh <MIN_FREE_SPACE> <MAX_SPACE_ALLOWED> <"INCOMINGPATH"> <"VIP_GROUPS"> <"VIP_DESTINATION"> <ANNOUNCE> <NAP> <"SECTION_NAME">
# DEBUG, GL_CONFIG_FILE, GL_LOG_FILE and ERROR_LOG_FILE must be #
# set in this file. Note that you can't have multiple #
# executions of the same script in some (or all) crontabs #
# unless u put them as background jobs. #
# +NOTE to people not using glftpd: Just make shure that all the #
# logs exists and that $NUKED_DIR_NAMES is set, you can #
# hardcode it instead of having it read from any config file. #
# #
# Bot config: -If you are using Darkheart's botscript you should add the #
# following 8 lines to sitebot-glftpd.api and then rehash it.: #
# set chans(sectionname-AUTODEL) " #channelname " #
# ^-edit ^-edit #
# set chans(sectionname-RMDIR) " #channelname " #
# ^-edit ^-edit #
# set echovars(AUTODEL) "size section deldir" #
# set echovars(RMDIR) "section" #
# set enabled_announce(AUTODEL) 1 #
# set enabled_announce(RMDIR) 1 #
# set mask(AUTODEL) "[b]\[%sitein AUTO-DELETE\][b] System freed [b]%size[b]MB in [b]%section[b] by deleting [b]%deldir[b]."
# set mask(RMDIR) "[b]\[%sitein AUTO-DELETE\][b] System deleted [b]%section[b]. Now continuing in next dated dir."
# -If you are using vShit's botscript you should add the #
# following 2 lines in the scanlog proc and then rehash it.: #
# AUTODEL: {sndall "[b]\[$sitename AUTO-DELETE\][b] System freed [b][lindex $args 0][b]MB in [b][lindex $args 1][b] by deleting [b][lindex $args 2][b]."}
# RMDIR: {sndall "[b]\[$sitename AUTO-DELETE\][b] System deleted [b][lindex $args 0][b]. Now continuing in next dated dir."}
# -If you are using vrpack (1.6.0 Beta) botscript you should add #
# the following 2 lines in the scanlog proc and then rehash it.:#
# AUTODEL: {sndall "\002\[$sns AUTO-DELETE\]\002 System freed \002[lindex $args 0]\002MB in \002[lindex $args 1]\002 by deleting \002[lindex $args 2]\002."}
# RMDIR: {sndall "\002\[$sns AUTO-DELETE\]\002 System deleted \002[lindex $args 0]\002. Now continuing in next dated dir."}
# -If you are using Dark0n3's botscript you should add 'AUTODEL' #
# and 'RMDIR' to the list in 'set msgtypes(DEFAULT) "..."'. #
# Also add following 8 lines to dZSbot.tcl and then rehash it.: #
# set chanlist(AUTODEL) "#channelname" #
# ^-edit #
# set chanlist(RMDIR) "#channelname" #
# ^-edit #
# set disable(AUTODEL) 0 #
# set disable(RMDIR) 0 #
# set variables(AUTODEL) "%size %msg %deldir" #
# set variables(RMDIR) "%msg" #
# set announce(AUTODEL) "%bold\[%sitename AUTO-DELETE\]%bold System freed %bold%size%bold MB in %bold%msg%bold by deleting %bold%deldir%bold"
# set announce(RMDIR) "%bold\[%sitename AUTO-DELETE\]%bold System deleted %bold%msg%bold. Now continuing in next dated dir."
# #
# Requirements: awk, cp, date, df, du, echo, expr, find, grep, ls, rm, rmdir, #
# sleep, tail, tr. #
# #
# Limitations: -Can only handle dirnames without spaces. Dirs that are inside #
# the releases that are inside the dated dirs can contain #
# spaces (eg, /glftpd/site/0-day/0219/Some_Wares-KvE/[100% OK]).#
# -The chars '[' and ']' are only supported in nuked dirs. #
# -Nuked dirs names must start with the nukedir_style. #
# -Only handles dated dirs named like 1127 (not 11-27, 11.27...).#
# -No more than 3 months can be handled. #
# #
# Changelog: v1.0 -> v1.1.beta: Certain groups releases can now be set #
# to not be deleted. #
# Changes in settings: Specify $VIP_GROUPS and $VIP_DESTINATION #
# v1.1.beta -> v1.2beta:Announcing can now be set to 2 levels. #
# Level 2 announes all deleted dirs, level #
# 1 only announces when a complete dated #
# dir gets been deleted. #
# Free space in $VIP_DESTINATION is now #
# checked before "VIP DIRS" are moved, it #
# would cause the script to run forever if #
# $VIP_DESTINATION didnt have enough space.#
# Changes in settings: Change $ANNOUNCE if you want to. #
# Update botscript so it triggers on RMDIR #
# v1.2beta -> v1.3beta: Changed so the script can handle 3 #
# months of dated dirs and made it check a #
# few variables for errors. #
# Changes in settings: None. #
# v1.3beta -> v1.3beta2:Some checks have been implemented to #
# make the script less sensitive to faulty #
# settings/dirnames/filenames. Added a #
# DEBUG setting that disables the actual #
# deleting. Also made the script send any #
# errors to glftpd's error.log. #
# On some systems, 'df -m' didn't work as #
# planned. Changed it to 'df -Pm'. Also #
# added braces around the parameters that #
# are sent to glftpd.log. #
# Changes in settings: Specify $ERROR_LOG_FILE. #
# v1.3beta2 -> v1.4beta:Made the DEBUG feature give some #
# feedback. #
# The script should now work in FreeBSD #
# since ive changed the parameters to 'ls'.#
# Added a new variable, $NAP, that makes #
# the script wait $NAP seconds between #
# deletions. This is for those whos fs #
# isn't updating its free space #
# immediately (like BSD's softupdate). #
# Made the script exit if deletion of the #
# nuked dirs freed up enough space. #
# Fixed a bug that caused some dirs to be #
# treated as $VIP_GROUPS. #
# Nuked releases from $VIP_GROUPS are now #
# being deleted, not moved as before. #
# The script can now take the settings as #
# arguments to the script. #
# Also made some minor changes that might #
# improve performance. #
# Changes in settings: Specify $NAP. #
# v1.4beta -> v1.4beta2:Fixed so that the script will rename any #
# $VIP_GROUPS dirs that are about to be #
# moved to $VIP_DESTINATION if they #
# already exist in $VIP_DESTINATION. #
# Refined the search for $VIP_GROUPS #
# dirnames, if 2 groups names were too #
# similar, both could be excluded. #
# Fixed a problem when using $NAP, it #
# deleted 1 release too much. #
# Corrected the instructions for Dark0n3's #
# botscript. #
# When $VIP_GROUP dirs couldn't be moved #
# to $VIP_DESTINATION because of lack of #
# space, their deletion wasn't logged to #
# glftpd.log. Fixed now. #
# When the oldest dir inside the oldest #
# dated dir was a symlink the script would #
# loop indefinitely. Fixed now. #
# Announcing of deleted and/or moved #
# $VIP_GROUP dirs can be turned on/off by #
# commenting in/out a few rows at the end #
# of the script (search for 'announced'). #
# Also changed so that the script won't #
# output errors when $INCOMINGPATH is #
# faulty (but it will abort). #
# Changes in settings: None. #
################################################################################
# This setting disables the actual deleting of the dirs. Set to 0 for no debug.
DEBUG=1
# How many Megabyte shall be kept free? (free space when script exits).
MIN_FREE_SPACE=1000
# If you only want to use a part of the device for the section this script keeps
# free you can set that amount (in MB) here. If you want to use the entire
# device, set this to 0 (zero). The above setting is nescessary too.
# Just think of this setting as the capacity of the disc. If you have a device
# with a capacity of 40000 MB and you want the section to only occupy 25000 MB
# of it, set this to 25000. Since the script uses this value as the capacity of
# the device, make shure there's at least this much space available.
MAX_SPACE_ALLOWED=0
# Where are the dirs to be freed located? (eg, /glftpd/site/mp3/).
# Use a trailing frontslash (/).
INCOMINGPATH="/glftpd/site/mp3/"
# What groups releases don't you want this script to delete? Separate with space
VIP_GROUPS="bmi mtc snd pow"
# If $VIP_GROUPS is set, then you must specify a location to where these will be
# moved when the oldest dated dir only consists of $VIP_GROUPS. If this is not
# set (or incorrectly set), all VIP_GROUPS releases will be deleted. Use a trailing frontslash (/).
VIP_DESTINATION="/glftpd/site/private/"
# Do you want the script to write to glftpd.log (for announcing)? Set to '1' if
# you only want dated-dir-deletion announced, '2' if you want all deletions
# announced or 'n' if you don't want any announcing at all.
ANNOUNCE=2
# For how many seconds shall the script wait between deletions? This is only
# interesting if your fs isn't updating its free space immediately. (like BSD's
# softupdate). The script will delete smaller dirs without waiting (up to about
# 100 MB). Set to zero (0) to disable the delay.
NAP=0
# What do you want the bot to call the section? (eg, MP3, iSO, PR0N).
SECTION_NAME=MP3
# What's the location of glftpd.conf?
GL_CONFIG_FILE="/etc/glftpd.conf"
# What's the location of glftpd.log?
GL_LOG_FILE="/glftpd/ftp-data/logs/glftpd.log"
# What's the location of glftpd's error.log?
ERROR_LOG_FILE="/glftpd/ftp-data/logs/error.log"
################################################################################
# No more specifications needed below,just some editing if the script won't work
################################################################################
if [ $# -ne 0 ] && [ $# -ne 8 ]; then
if [ $DEBUG -ne 0 ]; then
echo "Too few or too many arguments to script, aborting."
elif [ -w $ERROR_LOG_FILE ]; then
echo `date +"%a %b %d %T %Y"` "[ ] Error: $0 failed to execute:" \
"too few or too many arguments to script, aborting" >> $ERROR_LOG_FILE
fi
exit 1
fi
if [ $# -eq 8 ]; then
MIN_FREE_SPACE=$1
MAX_SPACE_ALLOWED=$2
INCOMINGPATH=$3
VIP_GROUPS=$4
VIP_DESTINATION=$5
ANNOUNCE=$6
NAP=$7
SECTION_NAME=$8
fi
# Scan glftpd.conf for the nukestyle.
NUKED_DIR_NAMES=`grep nukedir_style -i $GL_CONFIG_FILE | grep -v '#' | \
awk '{print $2}' | awk -F "%N" '{print $1}'`
# Make shure that the incomingpath is correct.
if [ ! -d "$INCOMINGPATH" ]; then
if [ $DEBUG -ne 0 ]; then
echo "Incomingpath ( $INCOMINGPATH ) is faulty, aborting."
elif [ -w $ERROR_LOG_FILE ]; then
echo `date +"%a %b %d %T %Y"` "[ ] Error: $0 failed to execute:" \
"the incomingpath is faulty" >> $ERROR_LOG_FILE
fi
exit 1
fi
# Check for disk usage/free space.
if [ $MAX_SPACE_ALLOWED -eq 0 ]; then
FREE_ON_DEVICE=`df -Pm "$INCOMINGPATH" | grep "/dev/" | awk '{print $4}'`
else
SPACE_USED=`expr \`du -ks "$INCOMINGPATH" | awk '{print $1}'\` / 1024`
FREE_ON_DEVICE=`expr $MAX_SPACE_ALLOWED - $SPACE_USED`
fi
# Just make shure that glftpd's log- and configfile are accessible.
if [ ! -r "$GL_CONFIG_FILE" ] || [ ! -w "$GL_LOG_FILE" ]; then
if [ $DEBUG -ne 0 ]; then
echo "One or more of your settings are faulty, aborting."
elif [ -w "$ERROR_LOG_FILE" ]; then
echo `date +"%a %b %d %T %Y"` "[ ] Error: $0 failed to execute:" \
"one or more of your settings are faulty" >> $ERROR_LOG_FILE
fi
exit 1
fi
if [ -z $NUKED_DIR_NAMES ] || [ -z $MIN_FREE_SPACE ] || \
[ -z $FREE_ON_DEVICE ]; then
if [ $DEBUG -ne 0 ]; then
echo "Error in script: variables not set properly, aborting."
elif [ -w "$ERROR_LOG_FILE" ]; then
echo `date +"%a %b %d %T %Y"` "[ ] Error: $0 failed to execute:" \
"error in script, variables not set properly" >> $ERROR_LOG_FILE
fi
exit 1
fi
if [ "$VIP_DESTINATION" ] && [ ! -w "$VIP_DESTINATION" ]; then
if [ $DEBUG -ne 0 ]; then
echo "Can't write to VIP_DESTINATION ($VIP_DESTINATION), aborting."
elif [ -w "$ERROR_LOG_FILE" ]; then
echo `date +"%a %b %d %T %Y"` "[ ] Error: $0 failed to execute:" \
"$VIP_DIR doesnt exist or cant be written to" >> $ERROR_LOG_FILE
fi
exit 1
fi
DEL_DIR_SIZE=0
DEL_DIR_SIZE_SUM=0
# Loop until enough space has been freed.
until [ $FREE_ON_DEVICE -gt $MIN_FREE_SPACE ]; do
# Get the oldest dir (sorted by NAME not date) (eg, 1115).
OCTOBER_CHECK=`ls -lr $INCOMINGPATH | awk '{print $9}' | \
grep -x "10[0123][[:digit:]]" | tail -n1`
NOVEMBER_CHECK=`ls -lr $INCOMINGPATH | awk '{print $9}' | \
grep -x "11[0123][[:digit:]]" | tail -n1`
DECEMBER_CHECK=`ls -lr $INCOMINGPATH | awk '{print $9}' | \
grep -x "12[0123][[:digit:]]" | tail -n1`
JANUARY_CHECK=`ls -lr $INCOMINGPATH | awk '{print $9}' | \
grep -x "01[0123][[:digit:]]" | tail -n1`
if [ $OCTOBER_CHECK ] && [ $JANUARY_CHECK ]; then
OLDEST_DIR=$OCTOBER_CHECK
elif [ $NOVEMBER_CHECK ] && [ $JANUARY_CHECK ]; then
OLDEST_DIR=$NOVEMBER_CHECK
elif [ $DECEMBER_CHECK ] && [ $JANUARY_CHECK ]; then
OLDEST_DIR=$DECEMBER_CHECK
else
OLDEST_DIR=`ls -lr $INCOMINGPATH | awk '{print $9}' | \
grep -x "[01][[:digit:]][0123][[:digit:]]" | tail -n1`
fi
# Make shure $OLDEST_DIR contains something.
if [ ! "$OLDEST_DIR" ]; then
if [ $DEBUG -ne 0 ]; then
echo "Error in script: no directory to delete, aborting."
elif [ -w $ERROR_LOG_FILE ]; then
echo `date +"%a %b %d %T %Y"` "[ ] Error: $0 failed to execute:" \
"error in script, no directory to delete" >> $ERROR_LOG_FILE
fi
exit 1
fi
# Remove any files lying directly in $OLDEST_DIR (eg, 1115/01-MrMjao.mp3).
if [ $DEBUG -eq 0 ]; then
while [ "`find "$INCOMINGPATH$OLDEST_DIR" -mindepth 1 -maxdepth 1 -type f \
| tail -n 1`" ]; do
rm -f "`find "$INCOMINGPATH$OLDEST_DIR" -mindepth 1 -maxdepth 1 -type f \
| tail -n 1`"
done
else
echo "Deleting any files directly inside "$INCOMINGPATH$OLDEST_DIR/""
fi
# Remove any nuked dirs in $OLDEST_DIR (eg, !NUKED-VA-MrMjao-2001-KvEMP3).
if [ $DEBUG -eq 0 ]; then
rm -rf "$INCOMINGPATH$OLDEST_DIR/$NUKED_DIR_NAMES"*
else
echo "Deleting all nuked dirs in "$INCOMINGPATH$OLDEST_DIR/""
fi
if [ $NAP -gt 0 ];then
sleep $NAP
fi
# Exit script if the deletion of nuked dirs freed up enough space.
if [ $MAX_SPACE_ALLOWED -eq 0 ]; then
FREE_ON_DEVICE=`df -Pm "$INCOMINGPATH" | grep "/dev/" | awk '{print $4}'`
else
SPACE_USED=`expr \`du -ks "$INCOMINGPATH" | awk '{print $1}'\` / 1024`
FREE_ON_DEVICE=`expr $MAX_SPACE_ALLOWED - $SPACE_USED`
fi
if [ -z $FREE_ON_DEVICE ] || [ -z $MIN_FREE_SPACE ]; then
if [ $DEBUG -ne 0 ]; then
echo "Error in script: variables not set properly, aborting."
elif [ -w $ERROR_LOG_FILE ]; then
echo `date +"%a %b %d %T %Y"` "[ ] Error: $0 failed to execute:" \
"error in script, variables not set properly" >> $ERROR_LOG_FILE
fi
exit 1
elif [ $FREE_ON_DEVICE -gt $MIN_FREE_SPACE ]; then
exit
fi
# Create a list for use in $DEL_DIR with releases that aren't to be deleted.
EXCLUDE_DIRS=""
if [ "$VIP_GROUPS" ]; then
for VIP_GROUP in $VIP_GROUPS; do
EXCLUDE_DIR=`ls "$INCOMINGPATH$OLDEST_DIR" | grep -i "[-_.]$VIP_GROUP$"`
EXCLUDE_DIRS=`echo "$EXCLUDE_DIRS$EXCLUDE_DIR"" "`
done
fi
# Remove oldest dir in $OLDEST_DIR, get the size for the botscript and
# announce deletion if $ANNOUNCE is set to 2.
DEL_DIR=`ls -lt "$INCOMINGPATH$OLDEST_DIR" | awk '{print $9}' | tr -d '/'`
for EXCLUDE_DIR in $EXCLUDE_DIRS; do
DEL_DIR=`echo "$DEL_DIR" | grep -vx '\'"$EXCLUDE_DIR"`
done
DEL_DIR=`echo "$DEL_DIR" | tail -n1`
if [ "$DEL_DIR" ] && [ -d "$INCOMINGPATH$OLDEST_DIR" ]; then
if [ -d "$INCOMINGPATH$OLDEST_DIR/$DEL_DIR" ] || \
[ -h "$INCOMINGPATH$OLDEST_DIR/$DEL_DIR" ]; then
DEL_DIR_SIZE=`expr \`du -ks "$INCOMINGPATH$OLDEST_DIR/$DEL_DIR" | \
awk '{print $1}'\` / 1024`
if [ $DEBUG -eq 0 ]; then
rm -rf "$INCOMINGPATH$OLDEST_DIR/$DEL_DIR"
else
echo "Deleting $INCOMINGPATH$OLDEST_DIR/$DEL_DIR"
fi
if [ $ANNOUNCE = 2 ]; then
echo `date +"%a %b %d %T %Y"` AUTODEL: \""$DEL_DIR_SIZE"\" \
\""$SECTION_NAME/$OLDEST_DIR"\" \""$DEL_DIR"\" >> $GL_LOG_FILE
fi
fi
fi
NO_OF_VIP_GROUP_DIRS=0
for VIP_GROUP in $VIP_GROUPS; do
NO_OF_VIP_GROUP_DIRS=`expr $NO_OF_VIP_GROUP_DIRS + \`ls \
"$INCOMINGPATH$OLDEST_DIR" | grep -ic "[-_.]$VIP_GROUP$"\``
done
# Are there any $VIP_GROUP dirs to move?
if [ `ls -l "$INCOMINGPATH$OLDEST_DIR" | grep -cv '^total'` -eq \
$NO_OF_VIP_GROUP_DIRS ] && [ $NO_OF_VIP_GROUP_DIRS -ne 0 ]; then
# Loop through each $VIP_DIR.
until [ `ls -l "$INCOMINGPATH$OLDEST_DIR" | grep -cv '^total'` -eq 0 ]; do
DIR_TO_MOVE=`ls -l "$INCOMINGPATH$OLDEST_DIR" | awk '{print $9}' | \
tail -n1`
if [ ! "$DIR_TO_MOVE" ] || \
[ ! -d "$INCOMINGPATH$OLDEST_DIR/$DIR_TO_MOVE" ] && \
[ ! -h "$INCOMINGPATH$OLDEST_DIR/$DIR_TO_MOVE" ]; then
if [ $DEBUG -ne 0 ]; then
echo "Error in script: variables not set properly, aborting."
elif [ -w "$ERROR_LOG_FILE" ]; then
echo `date +"%a %b %d %T %Y"` "[ ] Error: $0 failed to" \
"execute: error in script, variables not set properly" \
>> $ERROR_LOG_FILE
fi
exit 1
fi
# Move "VIP DIRS" if there's enough space in $VIP_DESTINATION and if
# $VIP_DESTINATION exist, else remove them.
if [ -d "$VIP_DESTINATION" ] && [ `df -Pm "$VIP_DESTINATION" | \
grep "/dev/" | awk '{print $4}'` -gt `expr \`du -ks \
"$INCOMINGPATH$OLDEST_DIR" | awk '{print $1}'\` / 1024` ]; then
if [ $DEBUG -eq 0 ]; then
# Rename and move the dir if it already exists in $VIP_DESTINATION.
if [ -e "$VIP_DESTINATION$DIR_TO_MOVE" ]; then
cp -pr "$INCOMINGPATH$OLDEST_DIR/$DIR_TO_MOVE" \
"$VIP_DESTINATION$DIR_TO_MOVE-`date +%s`"
else
cp -pr "$INCOMINGPATH$OLDEST_DIR/$DIR_TO_MOVE" "$VIP_DESTINATION"
fi
# If you want moved dirs to be announced as deleted, uncomment following 5 rows.
# if [ $ANNOUNCE = 2 ]; then
# echo `date +"%a %b %d %T %Y"` AUTODEL: \""$DEL_DIR_SIZE"\" \
# \""$SECTION_NAME/$OLDEST_DIR"\" \""$DEL_DIR"\" >> $GL_LOG_FILE
# sleep 1s
# fi
rm -rf "$INCOMINGPATH$OLDEST_DIR/$DIR_TO_MOVE"
else
echo "Movin $INCOMINGPATH$OLDEST_DIR/$DIR_TO_MOVE to $VIP_DESTINATION"
fi
else
if [ $DEBUG -eq 0 ]; then
# If you dont want deleted VIP_GROUP dirs announced,comment out the next 5 rows.
if [ $ANNOUNCE = 2 ]; then
echo `date +"%a %b %d %T %Y"` AUTODEL: \""$DEL_DIR_SIZE"\" \
\""$SECTION_NAME/$OLDEST_DIR"\" \""$DEL_DIR"\" >> $GL_LOG_FILE
sleep 1s
fi
rm -rf "$INCOMINGPATH$OLDEST_DIR/$DIR_TO_MOVE"
else
echo "Removing $INCOMINGPATH$OLDEST_DIR/$DIR_TO_MOVE (unable to move)"
fi
fi
done
fi
# Now delete the dated dir and announce it if announce is set to 1 or 2.
if [ `ls -l "$INCOMINGPATH$OLDEST_DIR" | grep -cv '^total'` -eq 0 ]; then
if [ $DEBUG -eq 0 ]; then
rmdir "$INCOMINGPATH$OLDEST_DIR"
else
echo "Deleting $INCOMINGPATH$OLDEST_DIR"
fi
if [ $ANNOUNCE = 1 ] || [ $ANNOUNCE = 2 ]; then
echo `date +"%a %b %d %T %Y"` RMDIR: \""$SECTION_NAME/$OLDEST_DIR"\" \
>> $GL_LOG_FILE
fi
fi
if [ $NAP -gt 0 ]; then
DEL_DIR_SIZE_SUM=`expr $DEL_DIR_SIZE_SUM + $DEL_DIR_SIZE`
if [ $DEL_DIR_SIZE_SUM -gt 100 ]; then
sleep $NAP
DEL_DIR_SIZE_SUM=0
fi
fi
# Are enough files deleted?
if [ $MAX_SPACE_ALLOWED -eq 0 ]; then
FREE_ON_DEVICE=`df -Pm "$INCOMINGPATH" | grep "/dev/" | awk '{print $4}'`
else
SPACE_USED=`expr \`du -ks "$INCOMINGPATH" | awk '{print $1}'\` / 1024`
FREE_ON_DEVICE=`expr $MAX_SPACE_ALLOWED - $SPACE_USED`
fi
if [ -z $FREE_ON_DEVICE ] || [ -z $MIN_FREE_SPACE ]; then
if [ $DEBUG -ne 0 ]; then
echo "Error in script: variables not set properly, aborting."
elif [ -w $ERROR_LOG_FILE ]; then
echo `date +"%a %b %d %T %Y"` "[ ] Error: $0 failed to execute:" \
"error in script, variables not set properly" >> $ERROR_LOG_FILE
fi
exit 1
fi
done
exit